AWREADY_AWVALID v2

sim_1/imports/sim_1/tb_axi4_Lite_MM.v

@@ -113,13 +113,14 @@ module tb_axi4_Lite_MM;
 //           s_axi_arvalid = 0;
            s_axi_aresetn = 1;           // write
            s_axi_awvalid = 1;
+           s_axi_wvalid = 1;
            s_axi_awaddr = 18'h10;
            s_axi_wdata  = 32'h88_77_66_55;  //66_55_77_88;
-           s_axi_wvalid = 1;
+           
            //s_axi_bready = 1;
-            #12
-           s_axi_awvalid = 0;               // added on 23022021.
-           s_axi_wvalid = 0;  
+//            #12
+//           s_axi_awvalid = 0;               // added on 23022021.
+//           s_axi_wvalid = 0;  
           
           #12
           s_axi_araddr = 18'h10;  

sources_1/imports/AXI4_liteMM/axi4_lite_v1_0_S_AXI_1.sv

@@ -119,6 +119,8 @@
     //wire we;
     //wire en;
     //wire [1:0]select;
+    reg  	axi_awready1;         // added for aw_w_ready control signals.
+	reg  	axi_wready1;         // added for aw_w_ready control signals.
     reg [(C_S_AXI_DATA_WIDTH/4)-1:0] temp_slv_reg;
     reg      s_data_done,s_data_done_1; // Enable when all the data written in slv_reg0
     wire     read_en;                   // Enable when address is valid
@@ -160,11 +162,10 @@
 	          // expects no outstanding transactions.
 	          axi_awready <= 1'b1;
 	          
-	        if (!wadr_dne)                // adde for control of AWready.232022021.
-	               axi_awready <= 1'b0;
-	          else 
-	               axi_awready <= 1'b1;
-	          
+	              /* if (!wadr_dne)                // adde for control of AWready.232022021.
+	                   axi_awready <= 1'b0;
+	               else 
+	                   axi_awready <= 1'b1;*/
 	        end
 	      else           
 	        begin
@@ -224,7 +225,7 @@
 	        end
 	    end 
 	end       
-
+    
 	// Implement memory mapped register select and write logic generation
 	// The write data is accepted and written to memory mapped registers when
 	// axi_awready, S_AXI_AWVALID, axi_wready and S_AXI_WVALID are asserted. Write strobes are used to
@@ -441,7 +442,7 @@
         
     //Enable_gen READ_ADDR_EN(.clk(S_AXI_ACLK),.rst(radr_dne),.en_in(slv_reg_rden),.en_out(read_en));
     Enable_gen READ_ADDR_EN(.clk(S_AXI_ACLK),.sys_rst_n(S_AXI_ARESETN),.stop(radr_dne),.en_in(slv_reg_rden),.en_out(read_en));
-    Enable_gen WRITE_ADDR_EN(.clk(S_AXI_ACLK),.sys_rst_n(S_AXI_ARESETN),.stop(wadr_dne),.en_in(s_data_done),.en_out(write_en)); //.en_in(slv_reg_wren),.en_out(write_en)); 
+    Enable_gen WRITE_ADDR_EN(.clk(S_AXI_ACLK),.sys_rst_n(S_AXI_ARESETN),.stop(wadr_dne),.en_in(slv_reg_wren),.en_out(write_en)); //.en_in(s_data_done),.en_out(write_en));
         
         
     always_comb