Manojkumar_Karudagattu
/
AXI-Verification
0
0
フォーク 0
コード 課題 0 プルリクエスト 0 リリース 0 Wiki アクティビティ
ソースを参照

delete files

master
manojkumar 6ヶ月前
親
f732bf5ff0
コミット
639e61d3be
4個のファイルの変更、0行の追加、446行の削除
分割表示
差分オプション
統計情報を表示 Patchファイルをダウンロード Diffファイルをダウンロード
  1. +0
    -204
      axi_slave_if.sv
  2. +0
    -72
      axi_slave_p_mon.sv
  3. +0
    -170
      axi_txn1.sv
  4. +0
    -0
      slave_p_agent.sv

+ 0
- 204
axi_slave_if.sv ファイルの表示

@@ -1,204 +0,0 @@
interface axi_slave_if (input bit clk, resetn);
///////////////////write address channel
input logic awvalid; /// master is sending new address
output logic awready; /// slave is ready to accept request
input logic [3:0] awid; ////// unique ID for each transaction
input logic [3:0] awlen; ////// burst length AXI3 : 1 to 16, AXI4 : 1 to 256
input logic [2:0] awsize; ////unique transaction size : 1,2,4,8,16 ...128 bytes
input logic [31:0] awaddr; ////write adress of transaction
input logic [1:0] awburst; ////burst type : fixed , INCR , WRAP
/////////////////////write data channel
input logic wvalid; //// master is sending new data
output logic wready; //// slave is ready to accept new data
input logic [3:0] wid; /// unique id for transaction
input logic [31:0] wdata; //// data
input logic [3:0] wstrb; //// lane having valid data
input logic wlast, //// last transfer in write burst
///////////////write response channel
input logic bready; ///master is ready to accept response
output logic bvalid; //// slave has valid response
output logic [3:0] bid; ////unique id for transaction
output logic [1:0] bresp; /// status of write transaction
////////////// read address channel
output logic reg arready; //read address ready signal from slave
input logic [3:0] arid; //read address id
input logic [31:0] araddr; //read address signal
input logic [3:0] arlen; //length of the burst
input logic [2:0] arsize; //number of bytes in a transfer
input logic [1:0] arburst;//burst type - fixed, incremental, wrapping
input logic arvalid; //address read valid signal
///////////////////read data channel
output logic [3:0] rid; //read data id
output logic [31:0]rdata; //read data from slave
output logic [1:0] rresp; //read response signal
output logic rlast; //read data last signal
output logic rvalid; //read data valid signal
input logic rready
//========================== ASSERTIONS========================
// WRITE ADDRESS CHANNEL************************************************************************************************************
//1st.(When awvalid is asserted then it remains asserted until awready is HIGH)
property AXI_AWVALID_AWREADY;
@(posedge clk) awvalid |-> (awvalid throughout (awready[->1]));
endproperty
A1:assert property (AXI_AWVALID_AWREADY);
else `uvm_error("ASSERTION","Failure AXI_AWVALID_AWREADY");
//2nd.(BURST can not cross a 4KB Boundary)
property w_burst_boundary;
@(posedge clk) (awvalid && awready) |-> (((2**awsize)*(awlen+1)) < 4096) ;
endproperty
A2:assert property (w_burst_boundary)
else `uvm_error("ASSERTION","Failure w_burst_boundary");
//3rd.(all write address channel remains stable after AWVALID is asserted)
property AXI_AWVALID_STABLE;
@(posedge clk) $rose(awvalid)|->($stable(awid)&& $stable(awaddr)
&&$stable(awlen)&& $stable(awsize)
&&$stable(awburst))throughout awready[->1];
endproperty
A3:assert property (AXI_AWVALID_STABLE)
else `uvm_error("ASSERTION","Failure AXI_AWVALID_STABLE");
//4th.(AWLEN value is 1,3,7,15 for Wrapping type Burst)
property AWLEN_WRAP_BURST;
@(posedge clk) disable iff(!resetn) (awburst==2'b10) |->(awlen==1|awlen==3||awlen==7||awlen==15);
endproperty
A4:assert property (AWLEN_WRAP_BURST)
else `uvm_error("ASSERTION","Failure AWLEN_WRAP_BURST");
//5th.(AWBURST val cant be 2'b11)
property AWBURST_CANT_2b11;
@(posedge clk) (awvalid && awready) |-> (awburst != 2'b11);
endproperty
A5:assert property (AWBURST_CANT_2b11)
else `uvm_error("ASSERTION","Failure AWBURST_CANT_2b11");
//WRITE DATA CHANNEL**************************************************************************************************************
//1st.
property AXI_WVALID_WREADY;
@(posedge clk) wvalid |-> (wvalid throughout (wready[->1])) ;
endproperty
A6: assert property (AXI_WVALID_WREADY)
else `uvm_error("ASSERTION","Failure AXI_WVALID_WREADY");
//2nd. Property to check whether all write address channel remains stable after WVALID is asserted
property AXI_WVALID_WREADY;
@(posedge clk) $rose(wvalid) |-> ( $stable(wid)
&& $stable(wdata)
&& $stable(wstrb)
&& $stable(wlast)) throughout wready[->1];
endproperty
A7:assert property (AXI_WVALID_STABLE)
else `uvm_error("ASSERTION","Failure AXI_WVALID_STABLE");
//WRITE RESPONSE CHANNEL****************************************************************************************************************
//1st.
property AXI_BVALID_BREADY;
@(posedge clk) bvalid|-> (bvalid throughout (bready[->1])) ;
endproperty
A8:assert property (AXI_BVALID_BREADY)
else `uvm_error("ASSERTION","Failure AXI_BVALID_BREADY");
//2nd.to check whether all write address channel remains stable after BVALID is asserted
property AXI_BVALID_STABLE;
@(posedge clk) $rose(bvalid)|->($stable(bid)&& $stable(bresp))throughout bready[->1];
endproperty
A9:assert property (AXI_BVALID_STABLE)
else `uvm_error("ASSERTION","Failure AXI_BVALID_STABLE");
//READ ADDRESS CHANNEL***********************************************************************************************
//1st.
property AXI_ARVALID_ARREADY;
@(posedge clk) arvalid |-> (arvalid throughout (arready[->1])) ;
endproperty
B1:assert property AXI_ARVALID_ARREADY;
else`uvm_error("ASSERTION","Failure AXI_ARVALID_ARREADY");
//2nd.(BURST can not cross a 4KB Boundary)
property r_burst_boubadary;
@(posedge clk) (arvalid && arready) |-> (((2**arsize)*(arlen+1)) < 4096);
endproperty
B2:assert property (r_burst_boubadary)
else `uvm_error("ASSERTION","Failure r_burst_boubadary");
//3rd.(ARLEN value is 1,3,7,15 for Wrapping type Burst)
property ARLEN_WRAP_BURST;
@(posedge clk) disable iff (!resetn) (arburst==2'b10) |-> (arlen==1 || arlen==3 || arlen==7 || arlen==15);
endproperty
B3:assert property (ARLEN_WRAP_BURST)
else `uvm_error("ASSERTION","Failure ARLEN_WRAP_BURST");
//4th.(arburst val cant be 2'b11)
property ARBURST_CANT_2b11; //
@(posedge clk) (arvalid && arready) |-> (arburst != 2'b11);
endproperty
B4:assert property (ARBURST_CANT_2b11)
else `uvm_error("ASSERTION","Failure ARBURST_CANT_2b11");
//5th. Property to check whether all write address channel remains stable after ARVALID is asserted
property AXI_ARVALID_STABLE;
@(posedge clk) $rose(arvalid) |-> ( $stable(arid)
&&$stable(araddr)
&&$stable(arlen)
&&$stable(arsize)
&&$stable(arburst)) throughout arready[->1];
endproperty
B5:assert property (AXI_ARVALID_STABLE)
else `uvm_error("ASSERTION","Failure AXI_ARVALID_STABLE");
//READ DATA CHANNEL***********************************************************************************************************
/1st.
property AXI_RVALID_RREADY;
@(posedge clk) rvalid |-> (rvalid throughout (rready[->1]));
endproperty
B6:assert property (AXI_RVALID_RREADY)
else `uvm_error("ASSERTION","Failure AXI_RVALID_RREADY");
//2nd.to check whether all write address channel remains stable after RVALID is asserted
property AXI_RVALID_STABLE;
@(posedge clk) $rose(rvalid) |-> ( $stable(rid)
&& $stable(rdata)
&& $stable(rresp)
&& $stable(rlast)) throughout rready[->1];
endproperty
B7:assert property (AXI_RVALID_STABLE)
else`uvm_error("ASSERTION","Failure AXI_RVALID_STABLE");
endinterface

+ 0
- 72
axi_slave_p_mon.sv ファイルの表示

@@ -1,72 +0,0 @@
class axi_slave_p_mon extends uvm_monitor;
`uvm_component_utils(axi_slave_p_mon)
uvm_analysis_port #(axi_txn) ap;
virtual axi_slave_if vif;
axi_txn mon_txn;
function new( string name = "axi_slave_p_mon", uvm_component parent = null);
super.new(name, parent);
ap = new("ap",this);
mon_txn= new ("mon_txn");
endfunction
virtual function void build_phase(uvm_phase phase);
super.build_phase(phase);
if (!uvm_config_db#(virtual axi_slave_if)::get(this,"","vif",vif))
begin
`uvm_error( get_type_name(),"Not able to get AXI INTF HANDLE")
end
endfunction
virtual task run_phase(uvm_phase phase);
forever begin
@(vif);
//WA
if (vif.awvalid == 1 && vif.awready == 1)begin
mon_txn = axi_tx::type_id::create("mon_txn");
mon_txn.awre = vif.awaddr;
mon_txn.awlen = vif.awlen;
mon_txn.awsize = vif.awsize;
mon_txn.awburst = burst_type_t'(vif.mon_cb.awburst);
tx.tx_id = vif.mon_cb.awid;
num_writes = 0;
end
//WD
if (vif.mon_cb.wvalid == 1 && vif.mon_cb.wready == 1)begin
num_writes++;
if (num_writes > 1)begin
tx.dataQ.push_back(vif.mon_cb.wdata);
end
end
//WR(B)
if (vif.mon_cb.bvalid == 1 && vif.mon_cb.bready == 1)begin
tx.resp = vif.mon_cb.bresp;
ap_port.write(tx);
end
//RA
if (vif.mon_cb.arvalid == 1 && vif.mon_cb.arready == 1)begin
tx = axi_tx::type_id::create("tx");
tx.wr_rd = 1'b0;
tx.addr = vif.mon_cb.araddr;
tx.burst_len = vif.mon_cb.arlen;
tx.burst_size = vif.mon_cb.arsize;
tx.burst_type = burst_type_t'(vif.mon_cb.arburst);
tx.tx_id = vif.mon_cb.arid;
num_reads = 0;
end
//RD
if (vif.mon_cb.rvalid == 1 && vif.mon_cb.rready == 1)begin
num_reads++;
if(num_reads > 1)begin
tx.dataQ.push_back(vif.mon_cb.rdata);
end
if (vif.mon_cb.rlast == 1)begin
ap_port.write(tx);
end
end
end
endtask
endclass

+ 0
- 170
axi_txn1.sv ファイルの表示

@@ -1,170 +0,0 @@
`include "uvm_macros.svh"
import uvm_pkg::*;
class axi_txn extends uvm_sequence_item ;
function new(string name = "axi_txn");
super.new(name);
endfunction
///////////////////write address channel
logic awvalid;// master is sending new address
logic awready; /// slave is ready to accept request
randc bit [3:0] awid; ////// unique ID for each transaction
randc logic [3:0] awlen; ////// burst length AXI3 : 1 to 16, AXI4 : 1 to 256
rand logic [2:0] awsize; ////unique transaction size : 1,2,4,8,16 ...128 bytes
rand logic [31:0] awaddr; ////write adress of transaction
randc logic [1:0] awburst; ////burst type : fixed , INCR , WRAP
/////////////////////write data channel
logic wvalid; //// master is sending new data
logic wready; //// slave is ready to accept new data
randc bit [3:0] wid;/// unique id for transaction
rand logic [31:0] wdata; //// data
rand logic [3:0] wstrb; //// lane having valid data
logic wlast; //// last transfer in write burst
///////////////write response channel
logic bready; ///master is ready to accept response
logic bvalid; //slave has valid response
bit [3:0] bid; ////unique id for transaction
logic [1:0] bresp; /// status of write transaction
////////////// read address channel
logic arready; //read address ready signal from slave
logic arvalid; //address read valid signal
randc bit [3:0] arid; //read address id
rand logic [31:0] araddr; //read address signal
randc logic [3:0] arlen; //length of the burst
randc logic [2:0] arsize; //number of bytes in a transfer
logic [1:0] arburst;//burst type - fixed, incremental, wrapping
///////////////////read data channelogic [3:0] rid; //read data id
logic [31:0]rdata; //read data from slave
logic [1:0] rresp; //read response signal
logic rlast; //read data last signal
logic rvalid; //read data valid signal
logic rready;
bit rid;
`uvm_object_param_utils_begin(axi_txn)
`uvm_field_int(awready,UVM_ALL_ON)
`uvm_field_int(awvalid,UVM_ALL_ON)
`uvm_field_int(awburst,UVM_ALL_ON)
`uvm_field_int(awsize,UVM_ALL_ON)
`uvm_field_int(awlen,UVM_ALL_ON)
`uvm_field_int(awaddr,UVM_ALL_ON)
`uvm_field_int(awid,UVM_ALL_ON)
`uvm_field_int(wready,UVM_ALL_ON)
`uvm_field_int(wvalid,UVM_ALL_ON)
`uvm_field_int(wlast,UVM_ALL_ON)
`uvm_field_int(wstrb,UVM_ALL_ON)
`uvm_field_int(wdata,UVM_ALL_ON)
`uvm_field_int(wid,UVM_ALL_ON)
`uvm_field_int(bid,UVM_ALL_ON)
`uvm_field_int(bresp,UVM_ALL_ON)
`uvm_field_int(bvalid,UVM_ALL_ON)
`uvm_field_int(bready,UVM_ALL_ON)
`uvm_field_int(arready,UVM_ALL_ON)
`uvm_field_int(arvalid,UVM_ALL_ON)
`uvm_field_int(arburst,UVM_ALL_ON)
`uvm_field_int(arsize,UVM_ALL_ON)
`uvm_field_int(arlen,UVM_ALL_ON)
`uvm_field_int(araddr,UVM_ALL_ON)
`uvm_field_int(arid,UVM_ALL_ON)
`uvm_field_int(rready,UVM_ALL_ON)
`uvm_field_int(rvalid,UVM_ALL_ON)
`uvm_field_int(rlast,UVM_ALL_ON)
`uvm_field_int(rresp,UVM_ALL_ON)
`uvm_field_int(rdata,UVM_ALL_ON)
`uvm_field_int(rid,UVM_ALL_ON)
`uvm_object_utils_end
//--------------------
// Same ID constraint for write transactions
constraint same_wr_id { awid==wid;}
// Same ID constraint for read transactions
constraint same_rd_id { arid==rid;}
//-----------------------------------------------------------------------------
//--------------
//4KB address boundary for write address channel
constraint awdder_4kb {awadder %4096 + (awlen+1 << awsize) <= 4096;}
//4KB address boundary for read address channel
constraint ardder_4kb {aradder % 4096 + (arlen+1 << arsize) <= 4096;}
//---------------------------------------------------------------------------------
//--------------------
//support 1 to 16 awlen. so max write data size is 16*(2**awsize)
//awburst!=2'b10(means-> if it's not wrap type)
constraint wr_data_size {if (awburst !=2'b10)
wdata inside {[1:(16*(2**awsize))]}; }
//support 1 to 16 arlen. so max write data size is 16*(2**arsize)
//arburst!=2'b10(means-> if it's not wrap type)
constraint rd_data_size {if (arburst !=2'b10)
rdata inside {[1:(16*(2**arsize))]}; }
//----------------------------------------------------------------------------
//-------------------
// bcs for Wrapping burst the length of the burst must be 2, 4, 8, or 16.
//so therefore write data should be multiple of BL(2,4,8, or 16) and (2**awsize)
constraint awburst_val {if (awburst ==2'b10)
{wdata inside {((2**awsize)*2),((2**awsize)*4),((2**awsize)*8),((2**awsize)*16)}; }}
// bcs for Wrapping burst the length of the burst must be 2, 4, 8, or 16.
//so therefore write data should be multiple of BL(2,4,8, or 16) and (2**arsize)
constraint arburst_val {if (arburst ==2'b10)
{rdata inside {((2**arsize)*2),((2**arsize)*4),((2**arsize)*8),((2**arsize)*16)}; }}
//------------------------------------------------------------------------------
//--------------------
//for Wrapping burst the length of the burst must be 2, 4, 8, or 16 (bcs BL= axlen+1)
constraint awburst_val {if (awburst==2'b10) {awlen inside {1,3,7,15};}}
//for Wrapping burst the length of the burst must be 2, 4, 8, or 16 (bcs BL= axlen+1)
constraint arburst_val {if (arburst==2'b10) {arlen inside {1,3,7,15};}}
//---------------------------------------------------------------------------------
endclass: axi_txn
module top;
axi_txn txt;
initial begin
repeat(10) begin
txt=new();
txt.randomize();
$display("pass");
end end
endmodule

+ 0
- 0
slave_p_agent.sv ファイルの表示


書き込み プレビュー
読み込み中…
キャンセル
保存